Westover Question

In: Business and Management

Submitted By bobmediafire
Words 997
Pages 4
Internet Case Study for Chapter 6: Managing Quality

Westover Electrical, Inc.

Westover Electrical, Inc., is a medium-size Houston manufacturer of wire windings used in making electric motors. Joe Wilson, VP operations, has experienced an increasing problem with rejected product found during the manufacturing operation. “I’m not sure where to begin,” admitted Joe at the weekly meeting with his boss. “Rejects in the Winding Department have been killing us the past two months. Nobody in operations has any idea why. I have just brought in a consultant, Roger Gagnon, to take a look at the situation and make recommendations about how we can find out what is going on. I don’t expect Roger to make technical recommendations—just see if he can point us in the right direction.”

Gagnon’s first stop later that day was the production floor. His discussions with the production supervisors in the Winding Department indicated that they had no real grasp of what the problem was or what to do to correct it. A tour of the winding operation indicated that there were three machines that wound wire onto plastic cores to produce the primary and secondary electric motor windings. After inspection by quality control (QC), these windings then went to the Packaging Department. Packaging personnel, Gagnon found, inspect their own work and make corrections on the spot. The problem is that too many windings are found to be defective and require reworking before they can be packaged.

Gagnon’s next stop was the Quality Control Department, where he obtained the records for the past month’s Winding Department rejects.

TABLE 1. January Transformer Reject Log: Winding Process No. of Reject Units by Cause

Failed No. Bad Twisted Broken Abraded Wrong Wrong Electrical
Date Inspected Winder Wind Wire Leads Wire Core Wire Test

1 100 1 1 0 4 1 0 0 1 100 2 2 1 0 0 1 5 0 100 3 0 0 0…...

Similar Documents

Question

...CASE: Nintendo Case Questions 1. What are the defining businesses and economic characteristics of the video game console industry? What is the industry like? 2. What is competition like in the video game console industry? Do five-forces analysis to support your answer. Which of the five competitive forces is strongest? Which is weakest? Would you characterize the overall strength of competition in video game consoles as fierce, strong, moderate to normal or weak? Why? 3. What forces are driving changes in the video game console industry? Are these driving forces acting to make the industry more or less competitively intense? Are the driving forces acting to make the industry more or less profitable in future years? 4. What 3-5 key factors determine the success of video game console developers like Nintendo? 5. What is Nintendo’s strategy? Which of the five generic strategies discussed in Chapter 5 is Nintendo using? What are some of the recent offensive and/or defensive strategies that Nintendo has employed? Have these tactics been successful? 6. Is it fair to characterize Nintendo’s introduction of the Wii as a blue ocean strategy? Why or why not? 7. How well is Nintendo’s strategy working in terms of the financial performance it is delivering? Should shareholders be pleased? Why or why not? What 2-3 weaknesses do you see in Nintendo’s financial performance? 8. What does a SWOT analysis reveal about the attractiveness of Nintendo’s......

Words: 306 - Pages: 2

It Questions

...could harm the processor unit. Throttling also helps to reduce power consumption when demands are low. 4. (TCO 6) Discuss bad sector errors. (Points : 10) Bad sector errors are the track and sector markings that fade off the hard drive over a lengthy time period or if a section of the drive has become dangerous. When this happens the best thing to do is create a backup and replace the hard drive 5. (TCOs 7, 11) Describe a domain name and provide examples of domain names. (Points : 10) A domain name it a texted based name that is unique that identifies the network. A host name and a domain name make up a fully qualified. Some examples of domain names are Hhoward.netflicks.com or www.autozone.com. 6. (TCO 10) List five questions you might want to use to interview a user to begin the troubleshooting process. (Points : 10) 1. What seems to be the problem? 2. When did the problem start? 3. What programs were you using? 4. Have you made any changes to your system? Such as new hardware or software or have you deleted any programs from your system? 5. Can you show me how the problem occurred, so I can try to reproduce it? 7. (TCO 10) Explain why it is a good idea to trade suspected bad for known good when troubleshooting a PC. (Points : 10) It is a good idea to trade bad components for good ones when you are trying to troubleshoot a bad computer system while using a system exactly the same and running correctly. Taking the bad parts......

Words: 551 - Pages: 3

Westover Electrical

...PGMT 723 Quality Assignment   Westover Electrical, Inc. Westover Electrical, Inc., is a medium-size Houston manufacturer of wire windings used in making electric motors. Joe Wilson, VP operations, has experienced an increasing problem with rejected product found during the manufacturing operation. "I’m not sure where to begin," admitted Joe at the weekly meeting with his boss. "Rejects in the Winding Department have been killing us the past two months. Nobody in operations has any idea why. I have just brought in a consultant, Roger Gagnon, to take a look at the situation and make recommendations about how we can find out what is going on. I don’t expect Roger to make technical recommendations–just see if he can point us in the right direction." Gagnon’s first stop later that day was the production floor. His discussions with the production supervisors in the Winding Department indicated that they had no real grasp of what the problem was or what to do to correct it. A tour of the winding operation indicated that there were three machines that wound wire onto plastic cores to produce the primary and secondary electric motor windings. After inspection by quality control (QC), these windings then went to the Packaging Department. Packaging personnel, Gagnon found, inspect their own work and make corrections on the spot. The problem is that too many windings are found to be defective and require reworking before they can be packaged. Gagnon’s next stop was the Quality......

Words: 411 - Pages: 2

Question

...addition, based on last six months performance, three best performers were identified. Appreciation letters from Area Manager and General Manager were conferred upon these operators in a public function and prizes of their own choice were given to them. These efforts had a desired result and the performance of all the operators showed a marked improvement. The number of calls attended by some operators increased from 200 to 700 calls per day. Further, quick and polite response had reduced customer complaints. While reviewing the situation, Baheti was quite contended to see a remarkable change in the behavior of operators just four months. He wondered whether this change was a permanent phenomenon or he would have to strategize further. QUESTIONS 1. Discuss the long-term relevance of motivational techniques used by Baheti in the light of prevailing environment in the organization. 2. Had you been Baheti, what other techniques you would have used to improve the special services provided by the organization? CASE II EMPLOYEE RELATIONS AUDIT Triveni Foods Pvt. Ltd., a multinational confectionary company, having its branches in more than 50 countries and marketing its products in about 135 countries, established one of its production units in 1988 at Mathura near Delhi. It had a workforce of nearly 320 employees and sales turnover was more than Rs. 150 crores. Being a confectionary unit, hygiene was given the upper most priority to the extent that no......

Words: 4051 - Pages: 17

Westover

...Internet Case Study for Chapter 6: Managing Quality Westover Electrical, Inc. is a medium-size Houston manufacturer of wire windings used in making electric motors. Joe Wilson, VP operations, has experienced an increasing problem with rejected product found during the manufacturing operation. "I’m not sure where to begin," admitted Joe at the weekly meeting with his boss. "Rejects in the Winding Department have been killing us the past two months. Nobody in operations has any idea why. I have just brought in a consultant, Roger Gagnon, to take a look at the situation and make recommendations about how we can find out what is going on. I don’t expect Roger to make technical recommendations–just see if he can point us in the right direction." Gagnon’s first stop later that day was the production floor. His discussions with the production supervisors in the Winding Department indicated that they had no real grasp of what the problem was or what to do to correct it. A tour of the winding operation indicated that there were three machines that wound wire onto plastic cores to produce the primary and secondary electric motor windings. After inspection by quality control (QC), these windings then went to the Packaging Department. Packaging personnel, Gagnon found, inspect their own work and make corrections on the spot. The problem is that too many windings are found to be defective and require reworking before they can be packaged. Gagnon’s next stop was the Quality......

Words: 995 - Pages: 4

Westover Electrical, Inc.

...Internet Case Study for Chapter 6: Managing Quality Westover Electrical, Inc. is a medium-size Houston manufacturer of wire windings used in making electric motors. Joe Wilson, VP operations, has experienced an increasing problem with rejected product found during the manufacturing operation. "I’m not sure where to begin," admitted Joe at the weekly meeting with his boss. "Rejects in the Winding Department have been killing us the past two months. Nobody in operations has any idea why. I have just brought in a consultant, Roger Gagnon, to take a look at the situation and make recommendations about how we can find out what is going on. I don’t expect Roger to make technical recommendations–just see if he can point us in the right direction." Gagnon’s first stop later that day was the production floor. His discussions with the production supervisors in the Winding Department indicated that they had no real grasp of what the problem was or what to do to correct it. A tour of the winding operation indicated that there were three machines that wound wire onto plastic cores to produce the primary and secondary electric motor windings. After inspection by quality control (QC), these windings then went to the Packaging Department. Packaging personnel, Gagnon found, inspect their own work and make corrections on the spot. The problem is that too many windings are found to be defective and require reworking before they can be packaged. Gagnon’s next stop was the Quality......

Words: 995 - Pages: 4

Questions

...and services then your business is doomed to fail. Resourcefulness in a valuable skill for anyone, but I feel like it requires logic which would falls under left brain skills. Overall I would think a company would put more emphasis on a balanced person. Q2: When trying to build a company to last (in the long run), what are the THREE key factors that will most dramatically impact long-term firm performance? Explain how and why. Written down processes- When creating a company for the long run you need to make sure that everything has a written down process or policy. Uniformity for simple task can drive down labor cost because the more unskilled labor you can use the less you have to pay those replaceable people. There should be no question on what your company’s policies are, by having them written down it will clearly layout many grey areas to make them black and white. Building relationships- Building relationships with consumers and suppliers are key when building long-term business. It always cost a company more to gain a new customer than to retain an existing one. The same thing goes for business to business relationships, shopping for a new supplier cost time, time is the most valuable thing on the planet. You have to pay someone to do the shopping instead of paying them to actually produce. Good relationships can also lead to discounts or higher contribution margins if the relationship is strong enough. Proper planning- without a plan, you are running......

Words: 2166 - Pages: 9

Westover Case Study

...Westover Electrical, Inc. is a medium-size Houston manufacturer of wire windings used in making electric motors. Joe Wilson, VP operations, has experienced an increasing problem with rejected product found during the manufacturing operation. "I’m not sure where to begin," admitted Joe at the weekly meeting with his boss. "Rejects in the Winding Department have been killing us the past two months. Nobody in operations has any idea why. I have just brought in a consultant, Roger Gagnon, to take a look at the situation and make recommendations about how we can find out what is going on. I don’t expect Roger to make technical recommendations–just see if he can point us in the right direction." Gagnon’s first stop later that day was the production floor. His discussions with the production supervisors in the Winding Department indicated that they had no real grasp of what the problem was or what to do to correct it. A tour of the winding operation indicated that there were three machines that wound wire onto plastic cores to produce the primary and secondary electric motor windings. After inspection by quality control (QC), these windings then went to the Packaging Department. Packaging personnel, Gagnon found, inspect their own work and make corrections on the spot. The problem is that too many windings are found to be defective and require reworking before they can be packaged. Gagnon’s next stop was the Quality Control Department, where he obtained the records for the past......

Words: 986 - Pages: 4

Questions

...Please answer the following questions based on the video: 1. To what extent is our personality dictated by our genetic makeup?  Many of the personality traits that we have are either genetic or learned. For example, if a mother was loud and liked to express her opinion, as her daughter gets older, she has the same trait. This was both learned and genetic, because the genetic side was that it’s her mother and the learned side is because the young girl saw this as she grew up. 2. Is it formed by experience or do we inherit it?  Personality is formed by both experience and inheritance, just depends on how exactly the personality trait was formed by the individual. Many children copy what their parents do when they are younger, like cussing, fighting, or even acticing a certain way. Once they start getting older, many of the traits that we had when we were younger have gone away but a few stay. These are also inherited because they are traits that keep up with you in adulthood. 3. Provide an analysis of each panelist's viewpoint.  Prof. John Carey His biggest comebacks were science related. Prof. Peter McGuffin Peter’s point on twins were interesting. Twins that grew up in different areas, like separated at birth could live similar lives, is one thing that Peter seemed to talk about. He also believed that parents passed on many genes to their children, and that’s how personality is formed. Dr. Micheal Maler He was very into animals being tested......

Words: 381 - Pages: 2

Westover Electrical Inc

...Westover Electrical, Inc. Westover Electrical, Inc., is a medium-size Houston manufacturer of wire windings used in making electric motors. Joe Wilson, VP operations, has experienced an increasing problem with rejected product found during the manufacturing operation. "I’m not sure where to begin," admitted Joe at the weekly meeting with his boss. "Rejects in the Winding Department have been killing us the past two months. Nobody in operations has any idea why. I have just brought in a consultant, Roger Gagnon, to take a look at the situation and make recommendations about how we can find out what is going on. I don’t expect Roger to make technical recommendations–just see if he can point us in the right direction." Gagnon’s first stop later that day was the production floor. His discussions with the production supervisors in the Winding Department indicated that they had no real grasp of what the problem was or what to do to correct it. A tour of the winding operation indicated that there were three machines that wound wire onto plastic cores to produce the primary and secondary electric motor windings. After inspection by quality control (QC), these windings then went to the Packaging Department. Packaging personnel, Gagnon found, inspect their own work and make corrections on the spot. The problem is that too many windings are found to be defective and require reworking before they can be packaged. Gagnon’s next stop was the Quality Control Department, where he obtained...

Words: 255 - Pages: 2

Questions

...Questions 1. Taking into account information above, what type of organizational structure does the company belong? Why? Please explain. Mechanistic vs Organic Grand Candy is an Organic company as there are few rules. There is also an informal communication. 2. What type of organizational design will better suit to this firm? a) Simple b) functional c) divisional d) team structure The organization use team structure design both in stores and factory. A team consists of professionals with various skills. According to company's CEO (chief executive officer Hovhannes Aidinyan) if one member of a team should be fired all team members should give an agreement. 3. What type of departmentalization does the company use in the factory? a) functional b) customer c)process d)product In the contrary of stores and cafes the factory creates teams using a product departmentalization. It is necessary as and most suitable way of departmentalization as company produces more than 400 products. Questions 1. Taking into account information above,what type of organizational structure does the company belong? Why? Please explain. Mechanistic vs Organic MTS uses mechanistic organizational structure. First of all it is very big for being organic. Which is characteristic for mechanistic organizations, it has many rules, formulized communication channels in order to manage behavior and performance of huge amount of employees. According to changes given above,...

Words: 481 - Pages: 2

Westover Electrical Inc

...Problem definition: Westover Electrical Inc. is facing an increasing problem with the rejected products found during the manufacturing operation where they couldn’t find the source of the problem. For the past two months, the costs incurred due to these rejects have increased and as a result the company decided to act as soon as possible. This report defines the investigation done to find the problem by studying the supply chain starting with the production floor in the winding department and then going to the packaging department. In the winding department, no one knows what the problem is or how to correct it. In the packaging department, many windings are found to be defective and require reworking before they can be packaged. This is consuming a lot of time and rework. The report then gives the results found and the recommendations suggested for the problem. Problem analysis: Using some of the TQM tools, we will try to find the cause of the problem. 1. Flow chart Produce by machine #1 Produce by machine #2 Produce by machine #3 Quality Control inspection Inspect electrical pieces Problem ?? Send for packaging Rework The first step is to get an idea on the current workflow. No YES 2. Fish bone The next step is to try to figure out where the problem could be. 3. Data Summary We try to make use of the data received from the company No. of Reject Units by Cause | | | | | | | | | | | | | | | | | |......

Words: 1665 - Pages: 7

Westover

...In: Business and Management Westover Electrical Inc Problem definition: Westover Electrical Inc. is facing an increasing problem with the rejected products found during the manufacturing operation where they couldn’t find the source of the problem. For the past two months, the costs incurred due to these rejects have increased and as a result the company decided to act as soon as possible. This report defines the investigation done to find the problem by studying the supply chain starting with the production floor in the winding department and then going to the packaging department. In the winding department, no one knows what the problem is or how to correct it. In the packaging department, many windings are found to be defective and require reworking before they can be packaged. This is consuming a lot of time and rework. The report then gives the results found and the recommendations suggested for the problem. Problem analysis: Using some of the TQM tools, we will try to find the cause of the problem. 1. Flow chart Produce by machine #1 Produce by machine #2 Produce by machine #3 Quality Control inspection Inspect electrical pieces Problem ?? Send for packaging Rework The first step is to get an idea on the current workflow. No YES 2. Fish bone The next step is to try to figure out where the problem could be. 3. Data Summary We try to make use of the data received from the company No. of Reject Units by Cause | | | | | | | | |...

Words: 337 - Pages: 2

Questions

...iscussion Question Week 2 Paul Agnes Pierre Louis BUS/415 April 3, 2012 Toni Sellers Discussion Question Week 2 Mary is cutting weeds at her home. She is unable to trim some weeds she finds, because they grew between the rocks, so she removes the protective guard on the weed trimmer and trims the weeds. There are no warnings on the weed trimmer advising against removing the guard. She hits a rock, which is thrown to the side, hitting her neighbor in the eye and causing permanent damage. What kind of tort claim does the neighbor have? Who are the possible defendants? The Tort Claim the neighbor has is negligence and product liability. The possible defendants are Mary, the manufacturer, the distributor, the wholesaler, and the retailer. The neighbor would sue Mary for negligence because Mary should have never taken off the guard. And the neighbor would sue the manufacturer, the distributor, the wholesaler, and the retailer for product liability because during anytime during the exchange of product anyone could have put a warning on the guard warning of the dangers. Felix is a school bus driver. He is driving children home from school one day, when he is distracted by a fight in the back of the bus. He turns to see what is happening behind him, and accidentally strikes and kills two twins riding bicycles in the bike lane. One twin is a brain surgeon, and the other is a garbage collector. Each has dependents. Explain how damages will be......

Words: 672 - Pages: 3

Questions

...Question: Lately I’ve noticed that my employees spend way too much time texting when they should be working. Can you give me some guidance regarding text messaging in the workplace? I am not sure what I can and cannot do to prevent my employees from texting at work. Answer: Text messaging (or “texting”) has grown so quickly in popularity and has become so pervasive that it has become part of our workplace culture. Some recent statistics regarding text messaging demonstrate how incredibly popular it has become in the last several years: More than 70% of wireless users (or more than 200 million Americans) have an SMS (or “short message service”) package for their mobile device that allows for short text messages to be sent from one device to another. The use of text messaging increased by 107% in 2009. Approximately 2.5 billion text messages are sent each day in the United States. More text messages are now sent via cell phone than calls placed with those same phones. Employers can adopt a policy prohibiting text messaging at work. If text messaging continues, you can discipline employees for violating the policy because, as you note, employees who are texting while at work are not working. Because of the prevalence of text messaging, even if you ban text messaging during work hours, you should put some guidelines in place that address texting in the workplace and require that your employees comply with them. For instance, you should have a policy in......

Words: 661 - Pages: 3