Week 4 Ilab

In: Other Topics

Submitted By overdrive69x
Words 569
Pages 3
ing Rubric
Category Points Description
Introduction 5 Introduce the objective and goal(s) for the report.
Manufacturer 5 Provide the manufacturer of the selected equipment.
Model number 5 Provide the model number of the selected equipment.
Cost 5 Provide the cost for the piece of required equipment.
Mounting 5 Explain how the equipment is mounted to a building.
Speed 5 Provide the maximum speed that each link will be able to achieve.
Frequency 5 For the RF option, provide rationale for the band and why other possible bands are rejected.
Analysis 5 Provide technical analysis, pros, and cons for addressing the business problem.
Recommendation 10 Provide a recommendation for a solution and why it was chosen and the other solution rejected. How does it satisfy goals and business requirements?
Total 50 A quality paper will meet or exceed all of the above requirements.

Deliverables
IMPORTANT: A report template is provided beginning on the next page, and you must use it to submit your assignment. Before submitting your assignment, delete the pages containing the instruction and rubric.
Your submitted assignment should begin with the title page and only contain your report. Don’t forget to place your name, your professor’s name, and the date on the title page.

Week 4 iLab Report
Replace with your name
DeVry University
NETW360: Wireless Technologies and Services

Design for a Wireless Campus Area Network

Submitted to: Mark Wilson
Professor:
Date: 10-7-13

Design for a Wireless Campus Area Network
Introduction
Guidelines: It’s always best to introduce a paper to the reader. It sets the tone and provides an overview of what will be covered and what the goals are.
• What is the project? What issues are addressed? Why is it important? What are the goals?
The project is to perform a technical evaluation of both the radio frequency and the…...

Similar Documents

Cis 170 Week 4 – Ilab 4 of 7

...HELPIDO.COM ------------------------------------------------------------- Follow this link to get the tutorial http://helpido.com/cis170ilab4-of-7/ ------------------------------------------------------------- CIS 170 WEEK 4 – ILAB 4 OF 7 ________________________________________ Scenario/Summary You will code, build, and execute a program that simulates the dialing of a phone using methods. Deliverables Submit the following to this week’s Dropbox:  A zipped Visual Studio project folder for each programming exercise. Refer to the Deliverables section of the Week 1 iLab page for detailed instructions on how to zip a project folder.  A single MS Word file named YourLastName_Lab1_ex1.docx containing the following items:  The source code for each program in the lab: Your source code should use proper indentation, include meaningful comments, and be error free. Start each with a specification that includes your name, the lab and exercise number, and a description of what the program accomplishes, similar to this:/* Specification: First Name Last Name Lab 1 Exercise # This program does X */  Labeled screenshot(s) of the output windows for each program, showing that each program produces correct results NOTE: A screenshot of a window can be created by first clicking on it to activate it. Next, press the key or key combination your specific computer uses to do a “print screen” (typically the Prnt Scrn or Prnt key in combination with the ctrl or......

Words: 390 - Pages: 2

Cis 170 Week 4 Ilab 4 of 7

...HELPIDO.COM ------------------------------------------------------------- Follow this link to get the tutorial http://helpido.com/cis170ilab4-of-7/ ------------------------------------------------------------- CIS 170 WEEK 4 ILAB 4 OF 7 ________________________________________ Scenario/Summary You will code, build, and execute a program that simulates the dialing of a phone using methods. Deliverables Submit the following to this week’s Dropbox:  A zipped Visual Studio project folder for each programming exercise. Refer to the Deliverables section of the Week 1 iLab page for detailed instructions on how to zip a project folder.  A single MS Word file named YourLastName_Lab1_ex1.docx containing the following items:  The source code for each program in the lab: Your source code should use proper indentation, include meaningful comments, and be error free. Start each with a specification that includes your name, the lab and exercise number, and a description of what the program accomplishes, similar to this:/* Specification: First Name Last Name Lab 1 Exercise # This program does X */  Labeled screenshot(s) of the output windows for each program, showing that each program produces correct results NOTE: A screenshot of a window can be created by first clicking on it to activate it. Next, press the key or key combination your specific computer uses to do a “print screen” (typically the Prnt Scrn or Prnt key in combination with the ctrl or FN...

Words: 390 - Pages: 2

Cis 170 Week 4 Ilab 4 of 7

...HELPIDO.COM ------------------------------------------------------------- Follow this link to get the tutorial http://helpido.com/cis170ilab4-of-7/ ------------------------------------------------------------- CIS 170 WEEK 4 ILAB 4 OF 7 ________________________________________ Scenario/Summary You will code, build, and execute a program that simulates the dialing of a phone using methods. Deliverables Submit the following to this week’s Dropbox:  A zipped Visual Studio project folder for each programming exercise. Refer to the Deliverables section of the Week 1 iLab page for detailed instructions on how to zip a project folder.  A single MS Word file named YourLastName_Lab1_ex1.docx containing the following items:  The source code for each program in the lab: Your source code should use proper indentation, include meaningful comments, and be error free. Start each with a specification that includes your name, the lab and exercise number, and a description of what the program accomplishes, similar to this:/* Specification: First Name Last Name Lab 1 Exercise # This program does X */  Labeled screenshot(s) of the output windows for each program, showing that each program produces correct results NOTE: A screenshot of a window can be created by first clicking on it to activate it. Next, press the key or key combination your specific computer uses to do a “print screen” (typically the Prnt Scrn or Prnt key in combination with the ctrl or FN...

Words: 390 - Pages: 2

Cis170 Cis/170 Cis 170 Week 4 Ilab 4 of 7

...HELPIDO.COM ------------------------------------------------------------- Follow this link to get the tutorial http://helpido.com/cis170ilab4-of-7/ ------------------------------------------------------------- CIS170 CIS/170 CIS 170 WEEK 4 ILAB 4 OF 7 ________________________________________ Scenario/Summary You will code, build, and execute a program that simulates the dialing of a phone using methods. Deliverables Submit the following to this week’s Dropbox:  A zipped Visual Studio project folder for each programming exercise. Refer to the Deliverables section of the Week 1 iLab page for detailed instructions on how to zip a project folder.  A single MS Word file named YourLastName_Lab1_ex1.docx containing the following items:  The source code for each program in the lab: Your source code should use proper indentation, include meaningful comments, and be error free. Start each with a specification that includes your name, the lab and exercise number, and a description of what the program accomplishes, similar to this:/* Specification: First Name Last Name Lab 1 Exercise # This program does X */  Labeled screenshot(s) of the output windows for each program, showing that each program produces correct results NOTE: A screenshot of a window can be created by first clicking on it to activate it. Next, press the key or key combination your specific computer uses to do a “print screen” (typically the Prnt Scrn or Prnt key in combination with...

Words: 393 - Pages: 2

Ilab Week 4 Netw 360

...(10 points) The Internet connection should be made through the DSL connection with Cat-5 CM-rated UTP cable for the current campus because this will increase security ant reliability. 2. How should the existing and new campus locations be connected to each other? (10 points) The Existing campus locations should be connected to each other via fiber optic cable. Fiber optic cables are less expensive; also there is less signal degradation, it’s non-flammable, and lastly extremely lightweight compares to the competitors. 3. Should the two locations share an Internet connection? (10 points) Yes because paying for two separate Internet connection methods would be pointless for this scenario. Sharing one connection is more cost effective. 4. Compare the advantages, disadvantages, and cost of fiber optic cable, 5 GHz wireless bridges, and free space optics as a means to interconnect the campus buildings to the IT wing of the Administration Building. (10 points) Fiber optic cable is more expensive as far as hardware and installation overall; but it is the fastest connection currently in the market. Wireless bridges provide wireless connection, however if proper precautions are not put into place there may be additional interference and signal loss, making it useless. 5. What would be required to interconnect the existing campus and the new campus to each other using fiber optic cable laid within the hiking trail right of way? (10 points) 6. Examine the data shown on the......

Words: 358 - Pages: 2

Cis170 Cis/170 Cis 170 Week 4 Ilab 4 of 7

...HELPIDO.COM ------------------------------------------------------------- Follow this link to get the tutorial http://helpido.com/cis170ilab4-of-7/ ------------------------------------------------------------- CIS170 CIS/170 CIS 170 WEEK 4 ILAB 4 OF 7 ________________________________________ Scenario/Summary You will code, build, and execute a program that simulates the dialing of a phone using methods. Deliverables Submit the following to this week’s Dropbox:  A zipped Visual Studio project folder for each programming exercise. Refer to the Deliverables section of the Week 1 iLab page for detailed instructions on how to zip a project folder.  A single MS Word file named YourLastName_Lab1_ex1.docx containing the following items:  The source code for each program in the lab: Your source code should use proper indentation, include meaningful comments, and be error free. Start each with a specification that includes your name, the lab and exercise number, and a description of what the program accomplishes, similar to this:/* Specification: First Name Last Name Lab 1 Exercise # This program does X */  Labeled screenshot(s) of the output windows for each program, showing that each program produces correct results NOTE: A screenshot of a window can be created by first clicking on it to activate it. Next, press the key or key combination your specific computer uses to do a “print screen” (typically the Prnt Scrn or Prnt key in combination with...

Words: 393 - Pages: 2

Math 221 Week 4 Ilab

...Statistics – Lab Week 4 Name:_Tyler Noyes MATH221 Statistical Concepts: * Probability * Binomial Probability Distribution Calculating Binomial Probabilities * Open a new MINITAB worksheet. * We are interested in a binomial experiment with 10 trials. First, we will make the probability of a success ¼. Use MINITAB to calculate the probabilities for this distribution. In column C1 enter the word ‘success’ as the variable name (in the shaded cell above row 1. Now in that same column, enter the numbers zero through ten to represent all possibilities for the number of successes. These numbers will end up in rows 1 through 11 in that first column. In column C2 enter the words ‘one fourth’ as the variable name. Pull up Calc > Probability Distributions > Binomial and select the radio button that corresponds to Probability. Enter 10 for the Number of trials: and enter 0.25 for the Event probability:. For the Input column: select ‘success’ and for the Optional storage: select ‘one fourth’. Click the button OK and the probabilities will be displayed in the Worksheet. * Now we will change the probability of a success to ½. In column C3 enter the words ‘one half’ as the variable name. Use similar steps to that given above in order to calculate the probabilities for this column. The only difference is in Event probability: use 0.5. * Finally, we will change the probability of a success to ¾. In column C4 enter the words ‘three fourths’ as......

Words: 1113 - Pages: 5

Comp 230 Week 4 Ilab

...' Define Script variables roomStr="" compStr="" room=0 computer=0 ans="" Do WScript.Stdout.Write "Please Enter the Room Number (100-105) ...... " roomStr = WScript.Stdin.ReadLine In the space provided below to copy and paste the remainder of your VBScript sourcecode. room = CInt(roomStr) If room < 100 OR room > 105 Then WScript.Stdout.Write Chr(7) WScript.Stdout.Write Chr(7) WScript.Echo "Error, 100 to 105 Only!!!" End If Loop While room < 100 OR room > 105 Do WScript.Stdout.Write "Please Enter the Computer Number (1-4) ...... " compStr = WScript.Stdin.ReadLine computer = CInt(compStr) If computer < 1 OR computer > 4 Then WScript.Stdout.Write Chr(7) WScript.Stdout.Write Chr(7) WScript.Echo "Error, 1 to 4 Only!!!" End If Loop While computer < 1 OR computer > 4 WScript.Echo WScript.Echo ("The IP Address in Room " & room & " for computer " & computer & " is " & ipAddress(room-100,computer-1)) WScript.Echo ' Display All IP Address Y/N? DO WScript.Stdout.Write "Do you wish to Display all of the IP Addresses (Y/N) ..... " ans = WScript.Stdin.ReadLine If (ans <> "Y" AND ans <> "y" AND ans <> "N" AND ans <> "n") Then WScript.Stdout.Write Chr(7) WScript.Stdout.Write Chr(7) WScript.Echo "Error, Y,y,N,n response Only!!!" End If LOOP While (ans <> "Y" AND......

Words: 1989 - Pages: 8

Ecet 340 Week 4 Ilab 4

...ECET 340 WEEK 4 ILAB 4 To purchase this visit following link: http://www.activitymode.com/product/ecet-340-week-4-ilab-4/ Contact us at: SUPPORT@ACTIVITYMODE.COM ECET 340 WEEK 4 ILAB 4 ECET 340 Week 4 iLab 4 I. OBJECTIVES: 1. To learn how to use A-to-D converters to digitize signals from analog input devices. 2. To learn how to write a C language program that samples the data from an analog device, digitizes it and formats it for output on an LCD. 3. To become more proficient in programming displays for real-time operation. Activity mode aims to provide quality study notes and tutorials to the students of ECET 340 Week 4 iLab 4 in order to ace their studies. ECET 340 WEEK 4 ILAB 4 To purchase this visit following link: http://www.activitymode.com/product/ecet-340-week-4-ilab-4/ Contact us at: SUPPORT@ACTIVITYMODE.COM ECET 340 WEEK 4 ILAB 4 ECET 340 Week 4 iLab 4 I. OBJECTIVES: 1. To learn how to use A-to-D converters to digitize signals from analog input devices. 2. To learn how to write a C language program that samples the data from an analog device, digitizes it and formats it for output on an LCD. 3. To become more proficient in programming displays for real-time operation. Activity mode aims to provide quality study notes and tutorials to the students of ECET 340 Week 4 iLab 4 in order to ace their studies. ECET 340 WEEK 4 ILAB 4 To purchase this visit following link: http://www.activitymode.com/product/ecet-340-week-4-ilab-4/ Contact...

Words: 757 - Pages: 4

Mis 589 All Ilabs Week 4 to 6

...MIS 589 ALL ILABS WEEK 4 TO 6 To purchase this visit following link: http://www.activitymode.com/product/mis-589-all-ilabs-week-4-to-6/ Contact us at: SUPPORT@ACTIVITYMODE.COM MIS 589 ALL ILABS WEEK 4 TO 6 MIS 589 All iLabs Week 4 To 6 MIS 589 Week 4 iLab: Office Network Expansion MIS 589 Week 5 iLab: LAN Modeling MIS 589 Week 6 iLab: LAN Modeling Activity mode aims to provide quality study notes and tutorials to the students of MIS 589 All iLabs Week 4 To 6 in order to ace their studies. MIS 589 ALL ILABS WEEK 4 TO 6 To purchase this visit following link: http://www.activitymode.com/product/mis-589-all-ilabs-week-4-to-6/ Contact us at: SUPPORT@ACTIVITYMODE.COM MIS 589 ALL ILABS WEEK 4 TO 6 MIS 589 All iLabs Week 4 To 6 MIS 589 Week 4 iLab: Office Network Expansion MIS 589 Week 5 iLab: LAN Modeling MIS 589 Week 6 iLab: LAN Modeling Activity mode aims to provide quality study notes and tutorials to the students of MIS 589 All iLabs Week 4 To 6 in order to ace their studies. MIS 589 ALL ILABS WEEK 4 TO 6 To purchase this visit following link: http://www.activitymode.com/product/mis-589-all-ilabs-week-4-to-6/ Contact us at: SUPPORT@ACTIVITYMODE.COM MIS 589 ALL ILABS WEEK 4 TO 6 MIS 589 All iLabs Week 4 To 6 MIS 589 Week 4 iLab: Office Network Expansion MIS 589 Week 5 iLab: LAN Modeling MIS 589 Week 6 iLab: LAN Modeling Activity mode aims to provide quality study notes and tutorials to the students of MIS 589 All iLabs Week 4 To 6 in order......

Words: 694 - Pages: 3

Ect 246 Week 4 Ilab Audio Amplifiers

...ECT 246 WEEK 4 ILAB AUDIO AMPLIFIERS To purchase this visit following link: http://www.activitymode.com/product/ect-246-week-4-ilab-audio-amplifiers/ Contact us at: SUPPORT@ACTIVITYMODE.COM ECT 246 WEEK 4 ILAB AUDIO AMPLIFIERS ECT 246 Week 4 iLab Audio Amplifiers TCO #4: Given an audio amplifier application that uses an integrated amplifier, examine the overall amplifier’s performance and verify the operation by using suitable input and output circuits. ECT 246 WEEK 4 ILAB AUDIO AMPLIFIERS To purchase this visit following link: http://www.activitymode.com/product/ect-246-week-4-ilab-audio-amplifiers/ Contact us at: SUPPORT@ACTIVITYMODE.COM ECT 246 WEEK 4 ILAB AUDIO AMPLIFIERS ECT 246 Week 4 iLab Audio Amplifiers TCO #4: Given an audio amplifier application that uses an integrated amplifier, examine the overall amplifier’s performance and verify the operation by using suitable input and output circuits. ECT 246 WEEK 4 ILAB AUDIO AMPLIFIERS To purchase this visit following link: http://www.activitymode.com/product/ect-246-week-4-ilab-audio-amplifiers/ Contact us at: SUPPORT@ACTIVITYMODE.COM ECT 246 WEEK 4 ILAB AUDIO AMPLIFIERS ECT 246 Week 4 iLab Audio Amplifiers TCO #4: Given an audio amplifier application that uses an integrated amplifier, examine the overall amplifier’s performance and verify the operation by using suitable input and output circuits. ECT 246 WEEK 4 ILAB AUDIO AMPLIFIERS To purchase this visit following......

Words: 585 - Pages: 3

Cis 246 Week 4 Ilab 4 Exploring Data Storage and Printers

...CIS 246 Week 4 iLab 4 Exploring Data Storage and Printers Purchase here http://devrycourse.com/cis-246-week-4-ilab-4-exploring-data-storage-and-printers Product Description iLab 4 of 7: Exploring Data Storage and Printers Submit your assignment to the Dropbox located on the silver tab at the top of this page. (See the Syllabus section “Due Dates for Assignments & Exams” for due date information.) Connect to the iLab here. iLAB OVERVIEW Scenario and Summary • Before beginning work, connect to your virtual lab platform (Skillsoft / Element K). • You will explore data storage and set up a printer. Additional Resource You may find this resource helpful as you prepare to complete the lab. • Printer and Data Storage Management iLAB STEPS TASK 1: Explore Data Storage STEP 1: Explore Properties of Drive C: Back to Top Action 1. Log on to the server with a password of Password! (remember to end the password with an exclamation point). 2. In Server Manager expand Storage. 3. Click Disk Management. 4. Right-click drive C: and click Properties. Insert a screenshot into your lab report showing the properties for drive C: (#1). 1. Click Cancel. STEP 2: Use chkdsk Back to Top Action 1. At the command prompt, type “chkdsk” and press Enter. 2. When done, scroll up so the chkdsk command can be seen and you can see the warning that follows the line: “WARNING! F paramet not specified.” Insert a screenshot into your lab report showing the warning......

Words: 4313 - Pages: 18

Cis 321 Week 4 Ilab 4 Milestone 4

...CIS 321 Week 4 iLab 4 Milestone 4 Purchase here http://devrycourse.com/cis-321-week-4-ilab-4-milestone-4 Product Description CIS321 Week 4 - Milestone 4 Part 1 Output from Visio Tutorial: Fully Attributed Entity Relationship Diagram (ERD) Entity Definition Matrix CIS 321 Week 4 iLab 4 Milestone 4 Purchase here http://devrycourse.com/cis-321-week-4-ilab-4-milestone-4 Product Description CIS321 Week 4 - Milestone 4 Part 1 Output from Visio Tutorial: Fully Attributed Entity Relationship Diagram (ERD) Entity Definition Matrix CIS 321 Week 4 iLab 4 Milestone 4 Purchase here http://devrycourse.com/cis-321-week-4-ilab-4-milestone-4 Product Description CIS321 Week 4 - Milestone 4 Part 1 Output from Visio Tutorial: Fully Attributed Entity Relationship Diagram (ERD) Entity Definition Matrix CIS 321 Week 4 iLab 4 Milestone 4 Purchase here http://devrycourse.com/cis-321-week-4-ilab-4-milestone-4 Product Description CIS321 Week 4 - Milestone 4 Part 1 Output from Visio Tutorial: Fully Attributed Entity Relationship Diagram (ERD) Entity Definition Matrix CIS 321 Week 4 iLab 4 Milestone 4 Purchase here http://devrycourse.com/cis-321-week-4-ilab-4-milestone-4 Product Description CIS321 Week 4 - Milestone 4 Part 1 Output from Visio Tutorial: Fully Attributed Entity Relationship Diagram (ERD) Entity Definition Matrix CIS 321 Week 4 iLab 4 Milestone 4 Purchase here http://devrycourse...

Words: 559 - Pages: 3

Ecet 340 Week 4 Ilab 4

...ECET 340 Week 4 iLab 4 Purchase here http://devrycourse.com/ecet-340-week-4-ilab-4 Product Description I. OBJECTIVES: 1. To learn how to use A-to-D converters to digitize signals from analog input devices. 2. To learn how to write a C language program that samples the data from an analog device, digitizes it and formats it for output on an LCD. 3. To become more proficient in programming displays for real-time operation. ECET 340 Week 4 iLab 4 Purchase here http://devrycourse.com/ecet-340-week-4-ilab-4 Product Description I. OBJECTIVES: 1. To learn how to use A-to-D converters to digitize signals from analog input devices. 2. To learn how to write a C language program that samples the data from an analog device, digitizes it and formats it for output on an LCD. 3. To become more proficient in programming displays for real-time operation. ECET 340 Week 4 iLab 4 Purchase here http://devrycourse.com/ecet-340-week-4-ilab-4 Product Description I. OBJECTIVES: 1. To learn how to use A-to-D converters to digitize signals from analog input devices. 2. To learn how to write a C language program that samples the data from an analog device, digitizes it and formats it for output on an LCD. 3. To become more proficient in programming displays for real-time operation. ECET 340 Week 4 iLab 4 Purchase here http://devrycourse.com/ecet-340-week-4-ilab-4 Product Description I. OBJECTIVES: 1. To learn how to use......

Words: 937 - Pages: 4

Bios140: Week 4 Ilab – Nutrition

...BIOS140: Week 4 iLab – Nutrition Name: Adriana Arroyo 1. (5 pts) Food Groups: Using the information found on mypyramid.gov, identify the recommended daily allowance for each of the five food groups below, for your age and gender. Include the URL below for the location you found this information. Food group | Recommended daily allowance (RDA)**Include units (cups, ounces, etc.) | URL | Protein | 6 oz | http://www.choosemyplate.gov/SuperTracker/myplan.aspx | Dairy | 3 cups | http://www.choosemyplate.gov/SuperTracker/myplan.aspx | Fruits | 2 cups | http://www.choosemyplate.gov/SuperTracker/myplan.aspx | Vegetables | 3 cups | http://www.choosemyplate.gov/SuperTracker/myplan.aspx | Grains | 7 oz | http://www.choosemyplate.gov/SuperTracker/myplan.aspx | 2. (10 pts) Food intake diary: Record the food and amount eaten. Include the units (cups, ounces, etc.). NOTE: It is not necessary that the food diary be from three consecutive days. Meal | Day 1 | Day 2 | Day 3 | Breakfast | 1 cup of Cherrios with ½ Nonfat Milk and 1 whole banana | 1 cup oatmeal with 1 Bagel thin | 1 cup oatmeal with 1 Bagel thin | Lunch | 1 whole mango | 1 whole peach | 1 whole mango | Dinner | 4 oz Salmon with 2 cups salad and 1 tbsp of Caesar dressing | Panda Bowl with chow mein and orange chicken from Panda Express | 2 Gorditas with ½ cup requeson | Snack(s) | 1 whole peach | 1 whole peach | 1 whole peach | Other | 1 cup of coffee with 8 Marias Gamesa......

Words: 747 - Pages: 3